AGP ceased to work on eMachines M5310 laptop

classic Classic list List threaded Threaded
10 messages Options
Reply | Threaded
Open this post in threaded view
|

AGP ceased to work on eMachines M5310 laptop

Mike Jakubik
The AGP does not seem to be detected on this laptop any more, i am
positive that DRM used to work just fine on an earlier 5.x version. This
is what happens why i try to load X.

drm0: <ATI Radeon RS100 Mobility U1> port 0x9000-0x90ff mem
0xe0000000-0xefffffff,0xd0100000-0xd010ffff irq 10 at device 5.0 on pci1
info: [drm] Initialized radeon 1.16.0 20050311 on minor 0
error: [drm:pid557:radeon_cp_init] *ERROR* radeon_cp_init called without
lock held
error: [drm:pid557:drm_unlock] *ERROR* Process 557 using kernel context 0

(EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI.

Here are the specifications for the laptop
http://emachines.com/support/product_support.html?cat=notebook&subcat=M-Series&model=M5310

And here is a dmesg
---
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #0: Sat Nov  5 21:32:57 EST 2005
    [hidden email]:/usr/obj/usr/src/sys/LAPTOP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile AMD Athlon(tm) XP 2400+ (1788.94-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480800<SYSCALL,MP,MMX+,3DNow+,3DNow>
real memory  = 469762048 (448 MB)
avail memory = 454459392 (433 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
pci_link0: <ACPI PCI Link LNK0> on acpi0
pci_link1: <ACPI PCI Link LNK1> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNK2> irq 10 on acpi0
pci_link3: <ACPI PCI Link LNK3> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNK4> on acpi0
pci_link5: <ACPI PCI Link LNK5> on acpi0
pci_link6: <ACPI PCI Link LNK6> irq 5 on acpi0
pci_link7: <ACPI PCI Link LNK7> irq 11 on acpi0
pci_link8: <ACPI PCI Link LNK8> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 8.0 (no driver attached)
pci0: <simple comms, generic modem> at device 9.0 (no driver attached)
cbb0: <TI4410 PCI-CardBus Bridge> mem 0xffbfe000-0xffbfefff at device 10.0
on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci0: <serial bus, FireWire> at device 10.1 (no driver attached)
pci0: <network> at device 12.0 (no driver attached)
ohci0: <NEC uPD 9210 USB controller> mem 0xd000a000-0xd000afff irq 11 at
device 13.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xd000b000-0xd000bfff irq 11 at
device 13.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xd000c800-0xd000c8ff irq
11 at device 13.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xd0006000-0xd0007fff irq 11 at
device 14.0 on pci0
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:03:25:08:b0:94
atapci0: <AcerLabs M5229 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8080-0x808f at device 16.0 on pci0
atapci0: using PIO transfers above 137GB as workaround for 48bit DMA
access bug, expect reduced performance
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <bridge> at device 17.0 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 1
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcdfff,0xdf000-0xdffff,0xe0000-0xe3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1788942231 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38154MB <TOSHIBA MK4021GAS GA224A> at ata0-master UDMA100
acd0: CDRW <TOSHIBA DVD-ROM SD-R2312/1008> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s2a


_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[hidden email]"
Reply | Threaded
Open this post in threaded view
|

Re: AGP ceased to work on eMachines M5310 laptop

Robert Marella
On Sun, 6 Nov 2005 14:20:06 -0500 (EST)
"Mike Jakubik" <[hidden email]> wrote:

> The AGP does not seem to be detected on this laptop any more, i am
> positive that DRM used to work just fine on an earlier 5.x version.
> This is what happens why i try to load X.
>
> drm0: <ATI Radeon RS100 Mobility U1> port 0x9000-0x90ff mem
> 0xe0000000-0xefffffff,0xd0100000-0xd010ffff irq 10 at device 5.0 on
> pci1 info: [drm] Initialized radeon 1.16.0 20050311 on minor 0
> error: [drm:pid557:radeon_cp_init] *ERROR* radeon_cp_init called
> without lock held
> error: [drm:pid557:drm_unlock] *ERROR* Process 557 using kernel
> context 0
>
> (EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI.
>
Hello Mike

Did you look at the sys/i386/conf/NOTES file?

# Direct Rendering modules for 3D acceleration.
device    drm             # DRM core module required by DRM drivers
device    mach64drm       # ATI Rage Pro, Rage Mobility P/M, Rage XL
device    mgadrm          # AGP Matrox G200, G400, G450, G550
device    r128drm         # ATI Rage 128
device    radeondrm       # ATI Radeon
device    sisdrm          # SiS 300/305, 540, 630
device    tdfxdrm         # 3dfx Voodoo 3/4/5 and Banshee
options   DRM_DEBUG       # Include debug printfs (slow)

You need to include in your kernel

device drm
device  radeondrm

I hope this helps

Robert
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[hidden email]"
Reply | Threaded
Open this post in threaded view
|

Re: AGP ceased to work on eMachines M5310 laptop

Mike Jakubik
Robert Marella wrote:

> On Sun, 6 Nov 2005 14:20:06 -0500 (EST)
> "Mike Jakubik" <[hidden email]> wrote:
>
>  
>> The AGP does not seem to be detected on this laptop any more, i am
>> positive that DRM used to work just fine on an earlier 5.x version.
>> This is what happens why i try to load X.
>>
>> drm0: <ATI Radeon RS100 Mobility U1> port 0x9000-0x90ff mem
>> 0xe0000000-0xefffffff,0xd0100000-0xd010ffff irq 10 at device 5.0 on
>> pci1 info: [drm] Initialized radeon 1.16.0 20050311 on minor 0
>> error: [drm:pid557:radeon_cp_init] *ERROR* radeon_cp_init called
>> without lock held
>> error: [drm:pid557:drm_unlock] *ERROR* Process 557 using kernel
>> context 0
>>
>> (EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI.
>>    
> Hello Mike
>
> Did you look at the sys/i386/conf/NOTES file?
>
> # Direct Rendering modules for 3D acceleration.
> device    drm             # DRM core module required by DRM drivers
> device    mach64drm       # ATI Rage Pro, Rage Mobility P/M, Rage XL
> device    mgadrm          # AGP Matrox G200, G400, G450, G550
> device    r128drm         # ATI Rage 128
> device    radeondrm       # ATI Radeon
> device    sisdrm          # SiS 300/305, 540, 630
> device    tdfxdrm         # 3dfx Voodoo 3/4/5 and Banshee
> options   DRM_DEBUG       # Include debug printfs (slow)
>
> You need to include in your kernel
>  

No you do not, it is loaded as a kernel module automatically.
> device drm
> device  radeondrm
>
> I hope this helps
>  

Unfortunately it does not, the lack of AGP support is the problem.

_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[hidden email]"
Reply | Threaded
Open this post in threaded view
|

Re: AGP ceased to work on eMachines M5310 laptop

Jung-uk Kim
In reply to this post by Mike Jakubik
On Sunday 06 November 2005 02:20 pm, Mike Jakubik wrote:

> The AGP does not seem to be detected on this laptop any more, i am
> positive that DRM used to work just fine on an earlier 5.x version.
> This is what happens why i try to load X.
>
> drm0: <ATI Radeon RS100 Mobility U1> port 0x9000-0x90ff mem
> 0xe0000000-0xefffffff,0xd0100000-0xd010ffff irq 10 at device 5.0 on
> pci1 info: [drm] Initialized radeon 1.16.0 20050311 on minor 0
> error: [drm:pid557:radeon_cp_init] *ERROR* radeon_cp_init called
> without lock held
> error: [drm:pid557:drm_unlock] *ERROR* Process 557 using kernel
> context 0
>
> (EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI.
>
> Here are the specifications for the laptop
> http://emachines.com/support/product_support.html?cat=notebook&subc
>at=M-Series&model=M5310

Please send me 'pciconf -lv' output.

Thanks,

Jung-uk Kim
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[hidden email]"
Reply | Threaded
Open this post in threaded view
|

Re: AGP ceased to work on eMachines M5310 laptop

Mike Jakubik
On Mon, November 7, 2005 11:49 am, Jung-uk Kim wrote:
> Please send me 'pciconf -lv' output.

Here it is, thanks.
--
hostb0@pci0:0:0:        class=0x060000 card=0x00000000 chip=0xcab01002
rev=0x13 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    device   = 'A3/U1 S2K CPU to PCI Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x700f1002 rev=0x01
hdr=0x01
    vendor   = 'ATI Technologies Inc'
    device   = 'A3/U1 PCI to AGP Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:7:0: class=0x060100 card=0x153310b9 chip=0x153310b9 rev=0x00
hdr=0x00
    vendor   = 'Acer Labs Incorporated (ALi)'
    device   = 'ALI M1533 Aladdin IV ISA Bridge'
    class    = bridge
    subclass = PCI-ISA
pcm0@pci0:8:0:  class=0x040100 card=0x2029161f chip=0x545110b9 rev=0x02
hdr=0x00
    vendor   = 'Acer Labs Incorporated (ALi)'
    device   = 'ALI M5451 PCI AC-Link Controller Audio Device'
    class    = multimedia
    subclass = audio
none0@pci0:9:0: class=0x070300 card=0x2027161f chip=0x545710b9 rev=0x00
hdr=0x00
    vendor   = 'Acer Labs Incorporated (ALi)'
    device   = 'ALI N5457, M1563M  AC97 Modem controller'
    class    = simple comms
    subclass = generic modem
cbb0@pci0:10:0: class=0x060700 card=0x2029161f chip=0xac41104c rev=0x02
hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCI4410 PC card CardBus Controller'
    class    = bridge
    subclass = PCI-CardBus
none1@pci0:10:1:        class=0x0c0010 card=0x2029161f chip=0x8017104c
rev=0x02 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCI4410A OHCI-Lynx IEEE-1394 FireWire Controller'
    class    = serial bus
    subclass = FireWire
none2@pci0:12:0:        class=0x028000 card=0x7050144f chip=0x432014e4
rev=0x02 hdr=0x00
    vendor   = 'Broadcom Corporation'
    device   = 'BCM4306 802.11b/g Wireless LAN Controller'
    class    = network
ohci0@pci0:13:0:        class=0x0c0310 card=0x2029161f chip=0x00351033
rev=0x43 hdr=0x00
    vendor   = 'NEC Electronics Hong Kong'
    device   = 'uPD9210FGC-7EA / µPD720101 USB 1.0 Host Controller (OHCI
compliant)'
    class    = serial bus
    subclass = USB
ohci1@pci0:13:1:        class=0x0c0310 card=0x2029161f chip=0x00351033
rev=0x43 hdr=0x00
    vendor   = 'NEC Electronics Hong Kong'
    device   = 'uPD9210FGC-7EA / µPD720101 USB 1.0 Host Controller (OHCI
compliant)'
    class    = serial bus
    subclass = USB
ehci0@pci0:13:2:        class=0x0c0320 card=0x2029161f chip=0x00e01033
rev=0x04 hdr=0x00
    vendor   = 'NEC Electronics Hong Kong'
    device   = 'uPD720100A/101 USB 2.0 Enhanced Host Controller'
    class    = serial bus
    subclass = USB
bfe0@pci0:14:0: class=0x020000 card=0x2029161f chip=0x440114e4 rev=0x01
hdr=0x00
    vendor   = 'Broadcom Corporation'
    device   = 'BCM4401 10/100 Integrated Ethernet Controller'
    class    = network
    subclass = ethernet
atapci0@pci0:16:0:      class=0x0101fa card=0x2029161f chip=0x522910b9
rev=0xc4 hdr=0x00
    vendor   = 'Acer Labs Incorporated (ALi)'
    device   = 'M1543 Southbridge EIDE Controller'
    class    = mass storage
    subclass = ATA
none3@pci0:17:0:        class=0x068000 card=0x2029161f chip=0x710110b9
rev=0x00 hdr=0x00
    vendor   = 'Acer Labs Incorporated (ALi)'
    device   = 'ALI M7101 Power Management Controller'
    class    = bridge
drm0@pci1:5:0:  class=0x030000 card=0x2029161f chip=0x43361002 rev=0x00
hdr=0x00
    vendor   = 'ATI Technologies Inc'
    device   = 'rs200 Radeon IGP 320M'
    class    = display
    subclass = VGA


_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[hidden email]"
Reply | Threaded
Open this post in threaded view
|

Re: AGP ceased to work on eMachines M5310 laptop

Jung-uk Kim
On Monday 07 November 2005 05:18 pm, Mike Jakubik wrote:

> On Mon, November 7, 2005 11:49 am, Jung-uk Kim wrote:
> > Please send me 'pciconf -lv' output.
>
> Here it is, thanks.
> --
> hostb0@pci0:0:0:        class=0x060000 card=0x00000000
> chip=0xcab01002 rev=0x13 hdr=0x00
>     vendor   = 'ATI Technologies Inc'
>     device   = 'A3/U1 S2K CPU to PCI Bridge'
>     class    = bridge
>     subclass = HOST-PCI

The driver exists on -CURRENT but it was not MFC'd before release.

http://docs.freebsd.org/cgi/mid.cgi?200509170336.j8H3alVZ083992

Jung-uk Kim
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[hidden email]"
Reply | Threaded
Open this post in threaded view
|

Re: AGP ceased to work on eMachines M5310 laptop

Mike Jakubik
Jung-uk Kim wrote:

> On Monday 07 November 2005 05:18 pm, Mike Jakubik wrote:
>  
>> On Mon, November 7, 2005 11:49 am, Jung-uk Kim wrote:
>>    
>>> Please send me 'pciconf -lv' output.
>>>      
>> Here it is, thanks.
>> --
>> hostb0@pci0:0:0:        class=0x060000 card=0x00000000
>> chip=0xcab01002 rev=0x13 hdr=0x00
>>     vendor   = 'ATI Technologies Inc'
>>     device   = 'A3/U1 S2K CPU to PCI Bridge'
>>     class    = bridge
>>     subclass = HOST-PCI
>>    
>
> The driver exists on -CURRENT but it was not MFC'd before release.
>
> http://docs.freebsd.org/cgi/mid.cgi?200509170336.j8H3alVZ083992
>  

Any ideas why? I can remember DRM working on an earlier 5.x however,
which has me confused.

_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[hidden email]"
Reply | Threaded
Open this post in threaded view
|

Re: AGP ceased to work on eMachines M5310 laptop

Jung-uk Kim
On Monday 07 November 2005 09:23 pm, Mike Jakubik wrote:

> Jung-uk Kim wrote:
> > On Monday 07 November 2005 05:18 pm, Mike Jakubik wrote:
> >> On Mon, November 7, 2005 11:49 am, Jung-uk Kim wrote:
> >>> Please send me 'pciconf -lv' output.
> >>
> >> Here it is, thanks.
> >> --
> >> hostb0@pci0:0:0:        class=0x060000 card=0x00000000
> >> chip=0xcab01002 rev=0x13 hdr=0x00
> >>     vendor   = 'ATI Technologies Inc'
> >>     device   = 'A3/U1 S2K CPU to PCI Bridge'
> >>     class    = bridge
> >>     subclass = HOST-PCI
> >
> > The driver exists on -CURRENT but it was not MFC'd before
> > release.
> >
> > http://docs.freebsd.org/cgi/mid.cgi?200509170336.j8H3alVZ083992
>
> Any ideas why?

I don't know.  ENOTIME, maybe?  CC'ing anholt.

Jung-uk Kim
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[hidden email]"
Reply | Threaded
Open this post in threaded view
|

Re: AGP ceased to work on eMachines M5310 laptop

Mike Jakubik
Jung-uk Kim wrote:

> On Monday 07 November 2005 09:23 pm, Mike Jakubik wrote:
>  
>> Jung-uk Kim wrote:
>>    
>>> On Monday 07 November 2005 05:18 pm, Mike Jakubik wrote:
>>>      
>>>> On Mon, November 7, 2005 11:49 am, Jung-uk Kim wrote:
>>>>        
>>>>> Please send me 'pciconf -lv' output.
>>>>>          
>>>> Here it is, thanks.
>>>> --
>>>> hostb0@pci0:0:0:        class=0x060000 card=0x00000000
>>>> chip=0xcab01002 rev=0x13 hdr=0x00
>>>>     vendor   = 'ATI Technologies Inc'
>>>>     device   = 'A3/U1 S2K CPU to PCI Bridge'
>>>>     class    = bridge
>>>>     subclass = HOST-PCI
>>>>        
>>> The driver exists on -CURRENT but it was not MFC'd before
>>> release.
>>>
>>> http://docs.freebsd.org/cgi/mid.cgi?200509170336.j8H3alVZ083992
>>>      
>> Any ideas why?
>>    
>
> I don't know.  ENOTIME, maybe?  CC'ing anholt.
>
>  

I emailed him in private, he is simply too busy. I have tried it with
6-STABLE, and it seems to work just fine. OpenGL apps are very slow, but
this is because the radeon driver does not support 3d acceleration on
the IGP chipsets for some reason.

Thanks.

--
agp0: <ATI RS100 AGP bridge> port 0x8090-0x8093 mem
0xd4000000-0xd7ffffff,0xd0400000-0xd0400fff at device 0.0 on pci0
drm0: <ATI Radeon RS100 Mobility U1> port 0x9000-0x90ff mem
0xe0000000-0xefffffff,0xd0100000-0xd010ffff irq 10 at device 5.0 on pci1
info: [drm] AGP at 0xd4000000 64MB
info: [drm] Initialized radeon 1.16.0 20050311 on minor 0

_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[hidden email]"
Reply | Threaded
Open this post in threaded view
|

Re: AGP ceased to work on eMachines M5310 laptop

Marc Santhoff
Am Dienstag, den 08.11.2005, 23:41 -0500 schrieb Mike Jakubik:
> Jung-uk Kim wrote:
> > On Monday 07 November 2005 09:23 pm, Mike Jakubik wrote:
[...]
> > I don't know.  ENOTIME, maybe?  CC'ing anholt.
> >
> >  
>
> I emailed him in private, he is simply too busy. I have tried it with
> 6-STABLE, and it seems to work just fine. OpenGL apps are very slow, but
> this is because the radeon driver does not support 3d acceleration on
> the IGP chipsets for some reason.

Sorry if this is OT, but:

Is there a list anywhere naming good combination of boards or chipsets
and graphic cards with *working 3d acceleration* on FreeBSD?

TIA,
Marc


_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[hidden email]"