FreeBSD › freebsd-amd64

Re: amd64/175282: Freebsd 9.1 release amd64, mb Intel D525MW, not worked onboard ethernet.

classic Classic list List threaded Threaded
♦
♦
 4 messages Options
linimon
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: amd64/175282: Freebsd 9.1 release amd64, mb Intel D525MW, not worked onboard ethernet.

linimon
Synopsis: Freebsd 9.1 release amd64, mb Intel D525MW, not worked onboard ethernet.

Responsible-Changed-From-To: freebsd-bugs->freebsd-amd64
Responsible-Changed-By: linimon
Responsible-Changed-When: Mon Jan 21 06:45:53 UTC 2013
Responsible-Changed-Why:
reclassify.

http://www.freebsd.org/cgi/query-pr.cgi?pr=175282
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-amd64
To unsubscribe, send any mail to "[hidden email]"
John Baldwin
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: amd64/175282: Freebsd 9.1 release amd64, mb Intel D525MW, not worked onboard ethernet.

John Baldwin
On Monday, January 21, 2013 1:46:16 am [hidden email] wrote:
> Synopsis: Freebsd 9.1 release amd64, mb Intel D525MW, not worked onboard
ethernet.
>
> Responsible-Changed-From-To: freebsd-bugs->freebsd-amd64
> Responsible-Changed-By: linimon
> Responsible-Changed-When: Mon Jan 21 06:45:53 UTC 2013
> Responsible-Changed-Why:
> reclassify.
>
> http://www.freebsd.org/cgi/query-pr.cgi?pr=175282

Can you provide more details such as the pciconf -lcv output for the onboard
ethernet?  Also, it sounds like a driver attached to the device but didn't
work?  If so, can you provide ifconfig output?

--
John Baldwin
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-amd64
To unsubscribe, send any mail to "[hidden email]"
zstepashka
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: amd64/175282: Freebsd 9.1 release amd64, mb Intel D525MW, not worked onboard ethernet.

zstepashka

No installed freebsd 9.1.  Boot from freebsd 9.1 amd64  memstick in live-cd mode:



pciconf:

hostb0@pci0:0:0:0: class=0x060000 card=0x574d8086 chip=0xa0008086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10 Family DMI Bridge'
    class      = bridge
    subclass   = HOST-PCI
    cap 09[e0] = vendor (length 8) Intel cap 12 version 1
vgapci0@pci0:0:2:0: class=0x030000 card=0x574d8086 chip=0xa0018086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10 Family Integrated Graphics Controller'
    class      = display
    subclass   = VGA
    cap 05[90] = MSI supports 1 message
    cap 01[d0] = powerspec 2  supports D0 D3  current D0
pcib1@pci0:0:28:0: class=0x060400 card=0x574d8086 chip=0x27d08086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family PCI Express Port 1'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
    cap 05[80] = MSI supports 1 message
    cap 0d[90] = PCI Bridge card=0x574d8086
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ecap 0002[100] = VC 1 max VC1
ecap 0005[180] = unknown 1
pcib2@pci0:0:28:1: class=0x060400 card=0x574d8086 chip=0x27d28086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family PCI Express Port 2'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x0(x1)
    cap 05[80] = MSI supports 1 message
    cap 0d[90] = PCI Bridge card=0x574d8086
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ecap 0002[100] = VC 1 max VC1
ecap 0005[180] = unknown 1
pcib3@pci0:0:28:2: class=0x060400 card=0x574d8086 chip=0x27d48086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family PCI Express Port 3'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x0(x1)
    cap 05[80] = MSI supports 1 message
    cap 0d[90] = PCI Bridge card=0x574d8086
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ecap 0002[100] = VC 1 max VC1
ecap 0005[180] = unknown 1
pcib4@pci0:0:28:3: class=0x060400 card=0x574d8086 chip=0x27d68086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family PCI Express Port 4'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x0(x1)
    cap 05[80] = MSI supports 1 message
    cap 0d[90] = PCI Bridge card=0x574d8086
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ecap 0002[100] = VC 1 max VC1
ecap 0005[180] = unknown 1
uhci0@pci0:0:29:0: class=0x0c0300 card=0x574d8086 chip=0x27c88086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:29:1: class=0x0c0300 card=0x574d8086 chip=0x27c98086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci2@pci0:0:29:2: class=0x0c0300 card=0x574d8086 chip=0x27ca8086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci3@pci0:0:29:3: class=0x0c0300 card=0x574d8086 chip=0x27cb8086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family USB UHCI Controller'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:29:7: class=0x0c0320 card=0x574d8086 chip=0x27cc8086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family USB2 EHCI Controller'
    class      = serial bus
    subclass   = USB
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
pcib5@pci0:0:30:0: class=0x060401 card=0x574d8086 chip=0x24488086 rev=0xe1 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Mobile PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
    cap 0d[50] = PCI Bridge card=0x574d8086
isab0@pci0:0:31:0: class=0x060100 card=0x574d8086 chip=0x27bc8086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'NM10 Family LPC Controller'
    class      = bridge
    subclass   = PCI-ISA
    cap 09[e0] = vendor (length 12) Intel cap 1 version 0
                 features: Quick Resume, SATA RAID-5, Mobile, 6 PCI-e x1 slots, SATA RAID-0/1/10
atapci0@pci0:0:31:2: class=0x01018f card=0x574d8086 chip=0x27c08086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH7 Family SATA IDE Controller'
    class      = mass storage
    subclass   = ATA
    cap 01[70] = powerspec 2  supports D0 D3  current D0
none0@pci0:0:31:3: class=0x0c0500 card=0x574d8086 chip=0x27da8086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family SMBus Controller'
    class      = serial bus
    subclass   = SMBus
re0@pci0:1:0:0: class=0x020000 card=0xd6258086 chip=0x816810ec rev=0x06 hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
    class      = network
    subclass   = ethernet
    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 05[50] = MSI supports 1 message, 64 bit
    cap 10[70] = PCI-Express 2 endpoint IRQ 2 max data 128(256) link x1(x1)
    cap 11[b0] = MSI-X supports 4 messages in map 0x20 enabled
    cap 03[d0] = VPD
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0002[140] = VC 1 max VC0
ecap 0003[160] = Serial 1 01000000684ce000
re1@pci0:5:0:0: class=0x020000 card=0x816710ec chip=0x816710ec rev=0x10 hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL-8110SC/8169SC Gigabit Ethernet'
    class      = network
    subclass   = ethernet
    cap 01[dc] = powerspec 2  supports D0 D1 D2 D3  current D0


ifconfig:

re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 00:0a:cd:1d:a9:c9
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: active
re1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 00:0a:cd:1d:a9:c9
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

thanks for the reply.

zstepashka
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: amd64/175282: Freebsd 9.1 release amd64, mb Intel D525MW, not worked onboard ethernet.

zstepashka
I experimented with memstick. After boot from memstick and setting IP adress, network not work. Start tcpdump and start ping from another computer. Tcpdump look incoming packet and echo reply. But reply packets physically not send, another computer does not see them.

Then, mount memstick in -rw mode, and edit rc.conf
ifconfig_re0="inet 192.168.1.1 netmask 255.255.255.0 -rxcsum -txcsum"
Booted from the stick again. Check ping - it working!  But not for long.
ifconfig re0 down, ifconfig re0 up -  network  packets not pass. Tcpdump sees nothing. After reboot, work again.
I really hope to help developers.

Sorry for bad inglish, please.
Free forum by Nabble Edit this page