(i386/88610) Problem with booting FreeBSD 6.0 bootonly.iso - 5.4 works fine

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

(i386/88610) Problem with booting FreeBSD 6.0 bootonly.iso - 5.4 works fine

Mitch (Bitblock)
SORRY FOR THE REPOST - ORIGINAL WAS HTML - STOPPED BY MODERATOR - THANKS

Something changed between versions – at first I thought the problem had
something to with the lan card – or maybe compatibility between the lan card
and the host system – but now I have a second lan card that produces the
same problem – but ONLY with FreeBSD 6.0 release.

I’m hoping stable is the right list? If it’s supposed to be current, sorry –
first time posting a problem like this…

The first 4 lans are on the motherboard.

The Fault 12 occurs just after starting to detect the 6th lan interface…

Here’s the 5th lan (first on this PCI card
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
rl4: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem
0xee013000-0xee0130ff irq 11 at device 8.0 on pci4
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
miibus4: <MII bus> on rl4
rlphy4: <RealTek internal media interface> on miibus4
rlphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl4: bpf attached
rl4: Ethernet address: 00:30:18:49:3f:44
rl4: [MPSAFE]

And here’s the start of the 6th…
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc100
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
rl5: <RealTek 8139 10/100BaseTX> port 0xc100-0xc1ff mem
0xee010000-0xee0100ff irq 7 at device 9.0 on pci4
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
Fatal trap 12: page fault while in kernel mode
fault virtual address        = 0x10
fault code                      = supervisor read, page not present
instruction pointer          = 0x20:0xc069c394
stack pointer             = 0x28:0xc1020938
frame pointer             = 0x28:0xc1020938
code segment                = base 0x0, limit 0xfffff, type 0x1b
                                    = DPL 0, pres 1, def32 1, gran 1
processor eflags            = interrupt enabled, resume, IOPL = 0
current process              = 0 (swapper)
trap number                   = 12
panic: page fault
Uptime: 1s

The problem occurs in the same place with a different type of 4 port lan
card, however the problem does not occur in a system with only one LAN on
the motherboard (with version 6.0 or 5.4)

So below I have attached boot messages from a 6.0 bootonly.iso (I tried to
capture messages from a bootonly 5.4, but using “boot –h” or “boot –h –v”
stops after loading acpi – presumably when it starts using the serial port –
and yet in 6.0 – this is fine ;-)

Any help greatly appreciated – I’ll do whatever testing and provide whatever
other information is required – thanks in advance!

m/

FreeBSD 6.0 release bootonly console dump:

SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
SMAP type=03 base=000000001eff3000 len=000000000000d000
SMAP type=04 base=000000001eff0000 len=0000000000003000
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=01 base=0000000000100000 len=000000001eef0000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights
reserved.
FreeBSD 6.0-RELEASE #0: Fri Nov  4 01:40:13 UTC 2005
    [hidden email]:/usr/obj/usr/src/sys/pfSense.6
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b0a000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b0a158.
Calibrating clock(s) ... i8254 clock: 1193212 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1002277897 Hz
CPU: VIA C3 Nehemiah+RNG+ACE (1002.28-MHz 686-class CPU)
  Origin = "CentaurHauls"  Id = 0x698  Stepping = 8
 
Features=0x381b83f<FPU,VME,DE,PSE,TSC,MSR,SEP,MTRR,PGE,CMOV,PAT,MMX,FXSR,SSE
>
real memory  = 520028160 (495 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000001e6fffff, 497909760 bytes (121560 pages)
avail memory = 499310592 (476 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faf30
bios32: Entry = 0xfb3b0 (c00fb3b0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb400
pnpbios: Found PnP BIOS data at 0xc00fbec0
pnpbios: Entry = f0000:bef0  Rev = 1.0
Other BIOS signatures found:
crypto: <crypto core>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 MAC ACL support>
wlan: mac acl policy registered
wlan: <802.11 Link Layer>
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
io: <I/O>
random: <entropy source, Hardware, VIA Nehemiah>
ath_hal: 0.9.16.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413,
DFS)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <CLE266 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1):      mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a):     mode1res=0x80000000 (0x80000000)
pci_cfgcheck:    device 0 [class=060000] [hdr=00] is there (id=31231106)
pcibios: BIOS version 2.10
Found $PIR table, 12 entries at 0xc00fdea0
PCI-Only Interrupts: 5 7 10 11
Location  Bus Device Pin  Link  IRQs
slot 1      0    8    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    8    B   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    8    C   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    8    D   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    A   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    B   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    C   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    D   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    A   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    B   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    C   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    D   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    A   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    B   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    C   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    D   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    B   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    C   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    D   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    A   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    B   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    C   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    D   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    A   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    B   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    C   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    D   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    A   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    B   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    C   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    D   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    B   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    C   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    D   0x05  3 4 5 6 7 9 10 11 12 14 15
embedded    0   17    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0   17    D   0x05  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    A   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    B   0x02  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    D   0x05  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    A   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    B   0x02  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    D   0x05  3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 0
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 4 6 7 10 11 12
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 4 6 7 10 11 12
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 6 7 10 11 12
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 6 7 10 11 12
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link2: <ACPI PCI Link LNKC> irq 7 on acpi0
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    7   N     0  3 4 6 7 10 11 12
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    7   N     0  3 4 6 7 10 11 12
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 6 7 10 11 12
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x3123, revid=0x00
            bus=0, slot=0, func=0
            class=06-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
            lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            powerspec 2  supports D0 D3  current D0
            map[10]: type 3, range 32, base e4000000, size 26, enabled
found-> vendor=0x1106, dev=0xb091, revid=0x00
            bus=0, slot=1, func=0
            class=06-04-00, hdrtype=0x01, mfdev=0
            cmdreg=0x0107, statreg=0xa230, cachelnsz=0 (dwords)
            lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10ec, dev=0x8139, revid=0x10
            bus=0, slot=8, func=0
            class=02-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
            intpin=a, irq=10
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 4, range 32, base 0000db00, size  8, enabled
            map[14]: type 1, range 32, base ee11c000, size  8, enabled
pcib0: matched entry for 0.8.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 8 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found-> vendor=0x10ec, dev=0x8139, revid=0x10
            bus=0, slot=9, func=0
            class=02-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
            intpin=a, irq=11
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 4, range 32, base 0000d000, size  8, enabled
            map[14]: type 1, range 32, base ee11e000, size  8, enabled
pcib0: matched entry for 0.9.INTA (src \_SB_.PCI0.LNKB:0)
pcib0: slot 9 INTA routed to irq 11 via \_SB_.PCI0.LNKB
found-> vendor=0x10ec, dev=0x8139, revid=0x10
            bus=0, slot=10, func=0
            class=02-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
            intpin=a, irq=7
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 4, range 32, base 0000d100, size  8, enabled
            map[14]: type 1, range 32, base ee110000, size  8, enabled
pcib0: matched entry for 0.10.INTA (src \_SB_.PCI0.LNKC:0)
pcib0: slot 10 INTA routed to irq 7 via \_SB_.PCI0.LNKC
found-> vendor=0x10ec, dev=0x8139, revid=0x10
            bus=0, slot=11, func=0
            class=02-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
            intpin=a, irq=5
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 4, range 32, base 0000d200, size  8, enabled
            map[14]: type 1, range 32, base ee111000, size  8, enabled
pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.LNKD:0)
pci_link3: Picked IRQ 9 with weight 0
pcib0: slot 11 INTA routed to irq 9 via \_SB_.PCI0.LNKD
found-> vendor=0x1180, dev=0x0476, revid=0x82
            bus=0, slot=12, func=0
            class=06-07-00, hdrtype=0x02, mfdev=1
            cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07
(1750 ns)
            intpin=a, irq=10
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 1, range 32, base ee112000, size 12, enabled
pcib0: matched entry for 0.12.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 12 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found-> vendor=0x1180, dev=0x0476, revid=0x82
            bus=0, slot=12, func=1
            class=06-07-00, hdrtype=0x02, mfdev=1
            cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07
(1750 ns)
            intpin=b, irq=11
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 1, range 32, base ee117000, size 12, enabled
pcib0: matched entry for 0.12.INTB (src \_SB_.PCI0.LNKB:0)
pcib0: slot 12 INTB routed to irq 11 via \_SB_.PCI0.LNKB
found-> vendor=0x12d8, dev=0x8148, revid=0x00
            bus=0, slot=13, func=0
            class=06-04-00, hdrtype=0x01, mfdev=0
            cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0
ns)
found-> vendor=0x1106, dev=0x3038, revid=0x80
            bus=0, slot=16, func=0
            class=0c-03-00, hdrtype=0x00, mfdev=1
            cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            intpin=a, irq=10
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[20]: type 4, range 32, base 0000dc00, size  5, enabled
pcib0: matched entry for 0.16.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 16 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found-> vendor=0x1106, dev=0x3038, revid=0x80
            bus=0, slot=16, func=1
            class=0c-03-00, hdrtype=0x00, mfdev=1
            cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            intpin=b, irq=11
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[20]: type 4, range 32, base 0000dd00, size  5, enabled
pcib0: matched entry for 0.16.INTB (src \_SB_.PCI0.LNKB:0)
pcib0: slot 16 INTB routed to irq 11 via \_SB_.PCI0.LNKB
found-> vendor=0x1106, dev=0x3038, revid=0x80
            bus=0, slot=16, func=2
            class=0c-03-00, hdrtype=0x00, mfdev=1
            cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            intpin=c, irq=7
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[20]: type 4, range 32, base 0000de00, size  5, enabled
pcib0: matched entry for 0.16.INTC (src \_SB_.PCI0.LNKC:0)
pcib0: slot 16 INTC routed to irq 7 via \_SB_.PCI0.LNKC
found-> vendor=0x1106, dev=0x3104, revid=0x82
            bus=0, slot=16, func=3
            class=0c-03-20, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            intpin=d, irq=5
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 1, range 32, base ee11d000, size  8, enabled
pcib0: matched entry for 0.16.INTD (src \_SB_.PCI0.LNKD:0)
pcib0: slot 16 INTD routed to irq 9 via \_SB_.PCI0.LNKD
found-> vendor=0x1106, dev=0x3177, revid=0x00
            bus=0, slot=17, func=0
            class=06-01-00, hdrtype=0x00, mfdev=1
            cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
            lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            powerspec 2  supports D0 D3  current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
            bus=0, slot=17, func=1
            class=01-01-8a, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            intpin=a, irq=255
            powerspec 2  supports D0 D3  current D0
            map[20]: type 4, range 32, base 0000df00, size  4, enabled
found-> vendor=0x1106, dev=0x3059, revid=0x50
            bus=0, slot=17, func=5
            class=04-01-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
            lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            intpin=c, irq=7
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 4, range 32, base 0000e000, size  8, enabled
pcib0: matched entry for 0.17.INTC (src \_SB_.PCI0.LNKC:0)
pcib0: slot 17 INTC routed to irq 7 via \_SB_.PCI0.LNKC
agp0: <VIA 862x (CLE266) host to PCI bridge> mem 0xe4000000-0xe7ffffff at
device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe4000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xec000000-0xedffffff
pcib1:   prefetched decode 0xe8000000-0xebffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1106, dev=0x3122, revid=0x03
            bus=1, slot=0, func=0
            class=03-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
            intpin=a, irq=10
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 3, range 32, base e8000000, size 26, enabled
pcib1: (null) requested memory range 0xe8000000-0xebffffff: good
            map[14]: type 1, range 32, base ec000000, size 24, enabled
pcib1: (null) requested memory range 0xec000000-0xecffffff: good
pcib0: matched entry for 0.1.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 1 INTA routed to irq 10 via \_SB_.PCI0.LNKA
pcib1: slot 0 INTA is routed to irq 10
pci1: <display, VGA> at device 0.0 (no driver attached)
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdb00
rl0: <RealTek 8139 10/100BaseTX> port 0xdb00-0xdbff mem
0xee11c000-0xee11c0ff irq 10 at device 8.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:40:48:b1:11:5d
rl0: [MPSAFE]
rl1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd000
rl1: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem
0xee11e000-0xee11e0ff irq 11 at device 9.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: bpf attached
rl1: Ethernet address: 00:40:48:b1:11:5c
rl1: [MPSAFE]
rl2: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd100
rl2: <RealTek 8139 10/100BaseTX> port 0xd100-0xd1ff mem
0xee110000-0xee1100ff irq 7 at device 10.0 on pci0
miibus2: <MII bus> on rl2
rlphy2: <RealTek internal media interface> on miibus2
rlphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl2: bpf attached
rl2: Ethernet address: 00:40:48:b1:11:5b
rl2: [MPSAFE]
rl3: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd200
rl3: <RealTek 8139 10/100BaseTX> port 0xd200-0xd2ff mem
0xee111000-0xee1110ff irq 9 at device 11.0 on pci0
miibus3: <MII bus> on rl3
rlphy3: <RealTek internal media interface> on miibus3
rlphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl3: bpf attached
rl3: Ethernet address: 00:40:48:b1:11:5a
rl3: [MPSAFE]
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xee112000-0xee112fff irq 10 at
device 12.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee112000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x04761180 0x02100007 0x06070082 0x00822000
  0x10: 0xee112000 0x020000dc 0x20020200 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010a
  0x40: 0x78563412 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x00a00001 0x00000000 0x04630463 0x00000000
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000
  0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xb0: 0x00000000 0x00000000 0x00003800 0x00000000
  0xc0: 0x78563412 0x00000000 0x00000000 0x00000000
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <RF5C476 PCI-CardBus Bridge> mem 0xee117000-0xee117fff irq 11 at
device 12.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee117000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0x04761180 0x02100007 0x06070082 0x00822000
  0x10: 0xee117000 0x020000dc 0x20030300 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0700020b
  0x40: 0x78563412 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x00a00001 0x00000000 0x04630463 0x00000000
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000
  0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xc0: 0x78563412 0x00000000 0x00000000 0x00000000
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pcib2: <PCI-PCI bridge> at device 13.0 on pci0
pcib2:   secondary bus     4
pcib2:   subordinate bus   4
pcib2:   I/O decode        0xc000-0xcfff
pcib2:   memory decode     0xee000000-0xee0fffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pci4: <PCI bus> on pcib2
pci4: physical bus=4
found-> vendor=0x10ec, dev=0x8139, revid=0x10
            bus=4, slot=8, func=0
            class=02-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
            intpin=a, irq=11
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 4, range 32, base 0000c000, size  8, enabled
pcib2: (null) requested I/O range 0xc000-0xc0ff: in range
            map[14]: type 1, range 32, base ee013000, size  8, enabled
pcib2: (null) requested memory range 0xee013000-0xee0130ff: good
pcib0: matched entry for 0.13.INTA (src \_SB_.PCI0.LNKB:0)
pcib0: slot 13 INTA routed to irq 11 via \_SB_.PCI0.LNKB
pcib2: slot 8 INTA is routed to irq 11
found-> vendor=0x10ec, dev=0x8139, revid=0x10
            bus=4, slot=9, func=0
            class=02-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
            intpin=a, irq=7
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 4, range 32, base 0000c100, size  8, enabled
pcib2: (null) requested I/O range 0xc100-0xc1ff: in range
            map[14]: type 1, range 32, base ee010000, size  8, enabled
pcib2: (null) requested memory range 0xee010000-0xee0100ff: good
pcib0: matched entry for 0.13.INTB (src \_SB_.PCI0.LNKC:0)
pcib0: slot 13 INTB routed to irq 7 via \_SB_.PCI0.LNKC
pcib2: slot 9 INTA is routed to irq 7
found-> vendor=0x10ec, dev=0x8139, revid=0x10
            bus=4, slot=10, func=0
            class=02-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
            intpin=a, irq=5
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 4, range 32, base 0000c200, size  8, enabled
pcib2: (null) requested I/O range 0xc200-0xc2ff: in range
            map[14]: type 1, range 32, base ee011000, size  8, enabled
pcib2: (null) requested memory range 0xee011000-0xee0110ff: good
pcib0: matched entry for 0.13.INTC (src \_SB_.PCI0.LNKD:0)
pcib0: slot 13 INTC routed to irq 9 via \_SB_.PCI0.LNKD
pcib2: slot 10 INTA is routed to irq 9
found-> vendor=0x10ec, dev=0x8139, revid=0x10
            bus=4, slot=11, func=0
            class=02-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
            intpin=a, irq=10
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 4, range 32, base 0000c300, size  8, enabled
pcib2: (null) requested I/O range 0xc300-0xc3ff: in range
            map[14]: type 1, range 32, base ee012000, size  8, enabled
pcib2: (null) requested memory range 0xee012000-0xee0120ff: good
pcib0: matched entry for 0.13.INTD (src \_SB_.PCI0.LNKA:0)
pcib0: slot 13 INTD routed to irq 10 via \_SB_.PCI0.LNKA
pcib2: slot 11 INTA is routed to irq 10
rl4: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000
pcib2: re0 requested I/O range 0xc000-0xc0ff: in range
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
rl4: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem
0xee013000-0xee0130ff irq 11 at device 8.0 on pci4
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
miibus4: <MII bus> on rl4
rlphy4: <RealTek internal media interface> on miibus4
rlphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl4: bpf attached
rl4: Ethernet address: 00:30:18:49:3f:44
rl4: [MPSAFE]
rl5: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc100
pcib2: re0 requested I/O range 0xc100-0xc1ff: in range
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
rl5: <RealTek 8139 10/100BaseTX> port 0xc100-0xc1ff mem
0xee010000-0xee0100ff irq 7 at device 9.0 on pci4
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address        = 0x10
fault code                      = supervisor read, page not present
instruction pointer          = 0x20:0xc07407c0
stack pointer             = 0x28:0xc0c209ec
frame pointer             = 0x28:0xc0c209ec
code segment                = base 0x0, limit 0xfffff, type 0x1b
                                    = DPL 0, pres 1, def32 1, gran 1
processor eflags            = interrupt enabled, resume, IOPL = 0
current process              = 0 (swapper)
trap number                   = 12
panic: page fault
cpuid = 0
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
SMAP type=03 base=000000001eff3000 len=000000000000d000
SMAP type=04 base=000000001eff0000 len=0000000000003000
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=01 base=0000000000100000 len=000000001eef0000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights
reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
    [hidden email]:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ec1000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0ec1170.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ec11b4.
Calibrating clock(s) ... i8254 clock: 1193206 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1002279760 Hz
CPU: VIA C3 Nehemiah+RNG+ACE (1002.28-MHz 686-class CPU)
  Origin = "CentaurHauls"  Id = 0x698  Stepping = 8
 
Features=0x381b83f<FPU,VME,DE,PSE,TSC,MSR,SEP,MTRR,PGE,CMOV,PAT,MMX,FXSR,SSE
>
real memory  = 520028160 (495 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001025000 - 0x000000001e6fffff, 493727744 bytes (120539 pages)
avail memory = 495345664 (472 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faf30
bios32: Entry = 0xfb3b0 (c00fb3b0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb400
pnpbios: Found PnP BIOS data at 0xc00fbec0
pnpbios: Entry = f0000:bef0  Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Hardware, VIA Nehemiah>
nfslock: pseudo-device
io: <I/O>
mem: <memory>
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <CLE266 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1):      mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a):     mode1res=0x80000000 (0x80000000)
pci_cfgcheck:    device 0 [class=060000] [hdr=00] is there (id=31231106)
pcibios: BIOS version 2.10
Found $PIR table, 12 entries at 0xc00fdea0
PCI-Only Interrupts: 5 7 10 11
Location  Bus Device Pin  Link  IRQs
slot 1      0    8    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    8    B   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    8    C   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    8    D   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    A   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    B   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    C   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    D   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    A   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    B   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    C   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    D   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    A   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    B   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    C   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    D   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    B   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    C   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    D   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    A   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    B   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    C   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    D   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    A   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    B   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    C   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    D   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    A   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    B   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    C   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    D   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    B   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    C   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    D   0x05  3 4 5 6 7 9 10 11 12 14 15
embedded    0   17    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0   17    D   0x05  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    A   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    B   0x02  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    D   0x05  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    A   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    B   0x02  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    D   0x05  3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 0
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 4 6 7 10 11 12
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 4 6 7 10 11 12
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 6 7 10 11 12
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 6 7 10 11 12
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link2: <ACPI PCI Link LNKC> irq 7 on acpi0
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    7   N     0  3 4 6 7 10 11 12
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    7   N     0  3 4 6 7 10 11 12
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 6 7 10 11 12
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x3123, revid=0x00
            bus=0, slot=0, func=0
            class=06-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
            lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            powerspec 2  supports D0 D3  current D0
            map[10]: type 3, range 32, base e4000000, size 26, enabled
found-> vendor=0x1106, dev=0xb091, revid=0x00
            bus=0, slot=1, func=0
            class=06-04-00, hdrtype=0x01, mfdev=0
            cmdreg=0x0107, statreg=0xa230, cachelnsz=0 (dwords)
            lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10ec, dev=0x8139, revid=0x10
            bus=0, slot=8, func=0
            class=02-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
            intpin=a, irq=10
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 4, range 32, base 0000db00, size  8, enabled
            map[14]: type 1, range 32, base ee11c000, size  8, enabled
pcib0: matched entry for 0.8.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 8 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found-> vendor=0x10ec, dev=0x8139, revid=0x10
            bus=0, slot=9, func=0
            class=02-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
            intpin=a, irq=11
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 4, range 32, base 0000d000, size  8, enabled
            map[14]: type 1, range 32, base ee11e000, size  8, enabled
pcib0: matched entry for 0.9.INTA (src \_SB_.PCI0.LNKB:0)
pcib0: slot 9 INTA routed to irq 11 via \_SB_.PCI0.LNKB
found-> vendor=0x10ec, dev=0x8139, revid=0x10
            bus=0, slot=10, func=0
            class=02-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
            intpin=a, irq=7
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 4, range 32, base 0000d100, size  8, enabled
            map[14]: type 1, range 32, base ee110000, size  8, enabled
pcib0: matched entry for 0.10.INTA (src \_SB_.PCI0.LNKC:0)
pcib0: slot 10 INTA routed to irq 7 via \_SB_.PCI0.LNKC
found-> vendor=0x10ec, dev=0x8139, revid=0x10
            bus=0, slot=11, func=0
            class=02-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
            intpin=a, irq=5
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 4, range 32, base 0000d200, size  8, enabled
            map[14]: type 1, range 32, base ee111000, size  8, enabled
pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.LNKD:0)
pci_link3: Picked IRQ 9 with weight 0
pcib0: slot 11 INTA routed to irq 9 via \_SB_.PCI0.LNKD
found-> vendor=0x1180, dev=0x0476, revid=0x82
            bus=0, slot=12, func=0
            class=06-07-00, hdrtype=0x02, mfdev=1
            cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07
(1750 ns)
            intpin=a, irq=10
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 1, range 32, base ee112000, size 12, enabled
pcib0: matched entry for 0.12.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 12 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found-> vendor=0x1180, dev=0x0476, revid=0x82
            bus=0, slot=12, func=1
            class=06-07-00, hdrtype=0x02, mfdev=1
            cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07
(1750 ns)
            intpin=b, irq=11
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 1, range 32, base ee117000, size 12, enabled
pcib0: matched entry for 0.12.INTB (src \_SB_.PCI0.LNKB:0)
pcib0: slot 12 INTB routed to irq 11 via \_SB_.PCI0.LNKB
found-> vendor=0x12d8, dev=0x8148, revid=0x00
            bus=0, slot=13, func=0
            class=06-04-00, hdrtype=0x01, mfdev=0
            cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0
ns)
found-> vendor=0x1106, dev=0x3038, revid=0x80
            bus=0, slot=16, func=0
            class=0c-03-00, hdrtype=0x00, mfdev=1
            cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            intpin=a, irq=10
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[20]: type 4, range 32, base 0000dc00, size  5, enabled
pcib0: matched entry for 0.16.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 16 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found-> vendor=0x1106, dev=0x3038, revid=0x80
            bus=0, slot=16, func=1
            class=0c-03-00, hdrtype=0x00, mfdev=1
            cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            intpin=b, irq=11
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[20]: type 4, range 32, base 0000dd00, size  5, enabled
pcib0: matched entry for 0.16.INTB (src \_SB_.PCI0.LNKB:0)
pcib0: slot 16 INTB routed to irq 11 via \_SB_.PCI0.LNKB
found-> vendor=0x1106, dev=0x3038, revid=0x80
            bus=0, slot=16, func=2
            class=0c-03-00, hdrtype=0x00, mfdev=1
            cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            intpin=c, irq=7
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[20]: type 4, range 32, base 0000de00, size  5, enabled
pcib0: matched entry for 0.16.INTC (src \_SB_.PCI0.LNKC:0)
pcib0: slot 16 INTC routed to irq 7 via \_SB_.PCI0.LNKC
found-> vendor=0x1106, dev=0x3104, revid=0x82
            bus=0, slot=16, func=3
            class=0c-03-20, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            intpin=d, irq=5
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 1, range 32, base ee11d000, size  8, enabled
pcib0: matched entry for 0.16.INTD (src \_SB_.PCI0.LNKD:0)
pcib0: slot 16 INTD routed to irq 9 via \_SB_.PCI0.LNKD
found-> vendor=0x1106, dev=0x3177, revid=0x00
            bus=0, slot=17, func=0
            class=06-01-00, hdrtype=0x00, mfdev=1
            cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
            lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            powerspec 2  supports D0 D3  current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
            bus=0, slot=17, func=1
            class=01-01-8a, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            intpin=a, irq=255
            powerspec 2  supports D0 D3  current D0
            map[20]: type 4, range 32, base 0000df00, size  4, enabled
found-> vendor=0x1106, dev=0x3059, revid=0x50
            bus=0, slot=17, func=5
            class=04-01-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
            lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
            intpin=c, irq=7
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 4, range 32, base 0000e000, size  8, enabled
pcib0: matched entry for 0.17.INTC (src \_SB_.PCI0.LNKC:0)
pcib0: slot 17 INTC routed to irq 7 via \_SB_.PCI0.LNKC
agp0: <VIA 862x (CLE266) host to PCI bridge> mem 0xe4000000-0xe7ffffff at
device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe4000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xec000000-0xedffffff
pcib1:   prefetched decode 0xe8000000-0xebffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1106, dev=0x3122, revid=0x03
            bus=1, slot=0, func=0
            class=03-00-00, hdrtype=0x00, mfdev=0
            cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
            lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
            intpin=a, irq=10
            powerspec 2  supports D0 D1 D2 D3  current D0
            map[10]: type 3, range 32, base e8000000, size 26, enabled
pcib1: (null) requested memory range 0xe8000000-0xebffffff: good
            map[14]: type 1, range 32, base ec000000, size 24, enabled
pcib1: (null) requested memory range 0xec000000-0xecffffff: good
pcib0: matched entry for 0.1.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 1 INTA routed to irq 10 via \_SB_.PCI0.LNKA
pcib1: slot 0 INTA is routed to irq 10
pci1: <display, VGA> at device 0.0 (no driver attached)
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdb00
rl0: <RealTek 8139 10/100BaseTX> port 0xdb00-0xdbff mem
0xee11c000-0xee11c0ff irq 10 at device 8.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:40:48:b1:11:5d
rl0: [MPSAFE]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd000
rl1: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem
0xee11e000-0xee11e0ff irq 11 at device 9.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: bpf attached
rl1: Ethernet address: 00:40:48:b1:11:5c
rl1: [MPSAFE]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd100
rl2: <RealTek 8139 10/100BaseTX> port 0xd100-0xd1ff mem
0xee110000-0xee1100ff irq 7 at device 10.0 on pci0
miibus2: <MII bus> on rl2
rlphy2: <RealTek internal media interface> on miibus2
rlphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl2: bpf attached
rl2: Ethernet address: 00:40:48:b1:11:5b
rl2: [MPSAFE]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd200
rl3: <RealTek 8139 10/100BaseTX> port 0xd200-0xd2ff mem
0xee111000-0xee1110ff irq 9 at device 11.0 on pci0
miibus3: <MII bus> on rl3
rlphy3: <RealTek internal media interface> on miibus3
rlphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl3: bpf attached
rl3: Ethernet address: 00:40:48:b1:11:5a
rl3: [MPSAFE]
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xee112000-0xee112fff irq 10 at
device 12.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee112000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x04761180 0x02100007 0x06070082 0x00822000
  0x10: 0xee112000 0x020000dc 0x20020200 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010a
  0x40: 0x78563412 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x00a00001 0x00000000 0x04630463 0x00000000
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000
  0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xb0: 0x00000000 0x00000000 0x00003800 0x00000000
  0xc0: 0x78563412 0x00000000 0x00000000 0x00000000
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <RF5C476 PCI-CardBus Bridge> mem 0xee117000-0xee117fff irq 11 at
device 12.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee117000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0x04761180 0x02100007 0x06070082 0x00822000
  0x10: 0xee117000 0x020000dc 0x20030300 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0700020b
  0x40: 0x78563412 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x00a00001 0x00000000 0x04630463 0x00000000
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000
  0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xb0: 0x00000000 0x0000000
Reply | Threaded
Open this post in threaded view
|

RE: (i386/88610) Problem with booting FreeBSD 6.0 bootonly.iso - 5.4works fine

Mitch (Bitblock)
> Something changed between versions - at first I thought the problem had
> something to with the lan card - or maybe compatibility between the lan
> card
> and the host system - but now I have a second lan card that produces the
> same problem - but ONLY with FreeBSD 6.0 release.

 [Mitch says:] Following up to my own post... I've just tried a single port
NIC in the PCI slot - that combination boots fine. But, as I mentioned
before, it doesn't seem to matter the chipset or PCI bridge chip (tried two
different ones) - it just seems to be that 6th network interface...

I don't have a dual port NIC readily available or I'd test that, but again,
it just seems to be related to this base board - BUT it worked in 5.4.

I deleted most of the original email from the followup - if there is someone
out there who can help me narrow this down, please referr to the earlier
message, or contact me or look at the problem report - if there's anything
else I can do to help debug, I'm more than willing (I really need this to
work) - please let me know... Thanks!

m/

_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[hidden email]"
Reply | Threaded
Open this post in threaded view
|

RE: (i386/88610) Problem with booting FreeBSD 6.0 bootonly.iso -5.4works fine

Mitch (Bitblock)
Can someone confirm what more information I should follow up with?

I haven't seen any traffic except my own on this thread - wondering if I'm
missing something or doing something wrong... please advise?

I'm trying to figure out how to capture a crash dump from the kernel while
booting, or how to get a kernel with debugging symbols loaded (I have some
advice on this later procedure I'm still working on...)

Would be nice to hear from anyone that at least my messages are getting
through? Thanks!

Dmesg and so on are posted with PR# 88610.

Thanks

m/

_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[hidden email]"