kernel build fails at 6.0-release!

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

kernel build fails at 6.0-release!

Giorgos Kapetanakis
Hi!

I just can't build my kernel. I tried several changes at the config file,
but I always get the same message.

------------------------------

#
# DEEPBLACK -- DeepBlack kernel configuration file for FreeBSD/i386
#
# $FreeBSD: src/sys/i386/conf/DEEPBLACK v.1.0 $

machine i386
#cpu I486_CPU # (commented out this at v.1.0!!)
#cpu I586_CPU # (commented out this at v.1.0!!)
cpu I686_CPU
ident DEEPBLACK

# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.

#makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols

#options SCHED_ULE # ULE scheduler
options SCHED_4BSD # 4BSD scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
#options NFSCLIENT # Network Filesystem Client (commented out this at
v.1.0!!)
#options NFSSERVER # Network Filesystem Server (commented out this at
v.1.0!!)
#options NFS_ROOT # NFS usable as /, requires NFSCLIENT (commented out
this at v.1.0!!)
#options MSDOSFS # MSDOS Filesystem (commented out this at v.1.0!!)
#options CD9660 # ISO 9660 Filesystem (commented out this at v.1.0!!)
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
#options GEOM_GPT # GUID Partition Tables. (commented out this at v.1.0!!)
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
#options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI (commented
out this at v.1.0!!)
#options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
#options SYSVMSG # SYSV-style message queues (commented out this at
v.1.0!!)
#options SYSVSEM # SYSV-style semaphores (commented out this at v.1.0!!)
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
#options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
                                        # output.  Adds ~128k to driver. (commented out this at v.1.0!!)
#options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
                                        # output.  Adds ~215k to driver. (commented out this at v.1.0!!)
options ADAPTIVE_GIANT # Giant mutex is adaptive.

device apic # I/O APIC

# Bus support.
device eisa
device pci

# Floppy drives
device fdc

# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
#device ataraid # ATA RAID drives (commented out this at v.1.0!!)
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives (commented out this at v.1.0!!)
options ATA_STATIC_ID # Static device numbering

# SCSI Controllers (commented out this at v.1.0!!)
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
##device ispfw # Firmware for QLogic HBAs- normally a module
#device mpt # LSI-Logic MPT-Fusion
##device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters

#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aha # Adaptec 154x SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters

#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50

# SCSI peripherals  (commented out this at v.1.0!!)
device scbus # SCSI bus (required for SCSI)
#device ch # SCSI media changers
device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem (commented out this at
v.1.0!!)
#device amr # AMI MegaRAID
#device arcmsr # Areca SATA II RAID
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options
#device hptmv # Highpoint RocketRAID 182x
#device iir # Intel Integrated RAID
#device ips # IBM (Adaptec) ServeRAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device twa # 3ware 9000 series PATA/SATA RAID

# RAID controllers (commented out this at v.1.0!!)
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device mlx # Mylex DAC960 family
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
#device psm # PS/2 mouse (commented out this at v.1.0!!)

device vga # VGA video card driver

device splash # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device sc

# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor

device agp # support several AGP chipsets

# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device cbb # cardbus (yenta) bridge (commented out this at v.1.0!!)
#device pccard # PC Card (16-bit) bus (commented out this at v.1.0!!)
#device cardbus # CardBus (32-bit) bus (commented out this at v.1.0!!)

# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports

# Parallel port
device ppc
device ppbus # Parallel port bus (required)
#device lpt # Printer (commented out this at v.1.0!!)
#device plip # TCP/IP over parallel (commented out this at v.1.0!!)
device ppi # Parallel port interface device
#device vpo # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc

# PCI Ethernet NICs. (commented out this at v.1.0!!)
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 adapter Gigabit Ethernet Card
#device ixgb # Intel PRO/10GbE Ethernet Card
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs! (commented out this at v.1.0!!)
#device miibus # MII bus support
#device bfe # Broadcom BCM440x 10/100 Ethernet
#device bge # Broadcom BCM570xx Gigabit Ethernet
#device dc # DEC/Intel 21143 and various workalikes
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device lge # Level 1 LXT1001 gigabit Ethernet
#device nge # NatSemi DP83820 gigabit Ethernet
#device nve # nVidia nForce MCP on-board Ethernet Networking
#device pcn # AMD Am79C97x PCI 10/100(precedence over 'lnc')
#device re # RealTek 8139C+/8169/8169S/8110S
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vge # VIA VT612x gigabit Ethernet
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard NICs included. (commented out this at v.1.0!!)
#device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device lnc # NE2100, NE32-VL Lance Ethernet cards
#device sn # SMC's 9000 series of Ethernet chips
#device xe # Xircom pccard Ethernet

# ISA devices that use the old ISA shims
#device le

# Wireless NIC cards (commented out this at v.1.0!!)
#device wlan # 802.11 support
#device an # Aironet 4500/4800 802.11 wireless NICs.
#device awi # BayStack 660 and others
#device ral # Ralink Technology RT2500 wireless NICs.
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
##device wl # Older non 802.11 Wavelan wireless NIC.

# Pseudo devices.
device loop # Network loopback
device random # Entropy device
#device ether # Ethernet support (commented out this at v.1.0!!)
#device sl # Kernel SLIP (commented out this at v.1.0!!)
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
#device bpf # Berkeley packet filter

# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
#device ehci # EHCI PCI->USB interface (USB 2.0) (commented out this at
v.1.0!!)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
#device ukbd # Keyboard (commented out this at v.1.0!!)
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
#device ural # Ralink Technology RT2500USB wireless NICs (commented out
this at v.1.0!!)
#device urio # Diamond Rio 500 MP3 player (commented out this at v.1.0!!)
#device uscanner # Scanners (commented out this at v.1.0!!)
# USB Ethernet, requires miibus (commented out this at v.1.0!!)
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cdce # Generic USB over Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet

# FireWire support (commented out this at v.1.0!!)
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)

# SCSI subsystem (add v.1.0)
device atapicam

# Sound card (add v.1.0)
device sound
device snd_es137x

-------------------------------------

linking kernel.debug
if.o(.text+0x35a0): In function `if_setlladdr':
/usr/src/sys/net/if.c:2152: undefined reference to `arp_ifinit'
*** Error code 1

Stop in /usr/obj/usr/src/sys/DEEPBLACK.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.

---------------------------------------

Can anyone help?
Thanx in advance!

--
Giorgos Kapetanakis

_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[hidden email]"
Reply | Threaded
Open this post in threaded view
|

Re: kernel build fails at 6.0-release!

Kris Kennaway
On Fri, Nov 11, 2005 at 11:41:36PM +0200, Giorgos Kapetanakis wrote:
> Hi!
>
> I just can't build my kernel. I tried several changes at the config file,
> but I always get the same message.

Go back to GENERIC then, or add back the differences until you find
the one you incorrectly removed.

Kris

attachment0 (194 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: kernel build fails at 6.0-release!

John-Mark Gurney
In reply to this post by Giorgos Kapetanakis
Giorgos Kapetanakis wrote this message on Fri, Nov 11, 2005 at 23:41 +0200:
> I just can't build my kernel. I tried several changes at the config file,
> but I always get the same message.
> #device ether # Ethernet support (commented out this at v.1.0!!)

You need this device!!  You can't compile the ethernet drivers w/o this...

> -------------------------------------
>
> linking kernel.debug
> if.o(.text+0x35a0): In function `if_setlladdr':
> /usr/src/sys/net/if.c:2152: undefined reference to `arp_ifinit'
> *** Error code 1
>
> Stop in /usr/obj/usr/src/sys/DEEPBLACK.
> *** Error code 1
>
> Stop in /usr/src.
> *** Error code 1
>
> Stop in /usr/src.
>
> ---------------------------------------
>
> Can anyone help?

Just use the GENERIC kernel next time...

--
  John-Mark Gurney Voice: +1 415 225 5579

     "All that I will do, has been done, All that I have, has not."
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[hidden email]"