(no subject)

classic Classic list List threaded Threaded
24 messages Options
12
Reply | Threaded
Open this post in threaded view
|

Re: Looping during boot-up process in FreeBSD-11 current

Alexander V. Chernikov-4
On 01.10.2014 02:02, Mike. wrote:
> On 9/30/2014 at 7:25 PM José Pérez Arauzo wrote:
>
>
> |[snip]
> |Try the 271146,
> |[snip]
>  =============

This might be related with r271207.
Can you try r271206 (or any recent HEAD with reverted r271207) ?

>
>
> I installed the 10.0 release CD.
>
> Then (after installing pkg, svn, etc.):
>
>
> cd /usr/src
>
> svn update -r271146
>
> make buildkernel
>
> make installkernel
>
> reboot
>
>
> I got to the login prompt, so it did not exhibit the looping issue
> I've experienced.
>
> /usr/src/UPDATING shows  20140708 p7  as the latest patch for the
> source.
>
> dmesg (with boot -v) follows:
> (note: when I boot 11.0-current with boot -v, the looping begins
> right after the place where the "GEOM: new disk cd0" line appears in
> the dmesg below)
>
>
>
>
> Copyright (c) 1992-2014 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 10.0-RELEASE-p7 #0 r271146: Tue Sep 30 16:38:12 EDT 2014
>     root@a31pf:/usr/obj/usr/src/sys/GENERIC i386
> FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc1678000.
> Calibrating TSC clock ... TSC clock: 1698592154 Hz
> CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz (1698.59-MHz 686-class
> CPU)
>   Origin = "GenuineIntel"  Id = 0xf24  Family = 0xf  Model =
> 0x2  Stepping = 4
>   Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PG
> E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
>
> Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64
> entries
> Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
> 1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64
> byte line size
> Trace cache: 12K-uops, 8-way set associative
> 2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64
> byte line size
> real memory  = 1073741824 (1024 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
> 0x0000000001826000 - 0x000000003ee0efff, 1029607424 bytes (251369
> pages)
> avail memory = 1029230592 (981 MB)
> XEN: CPU 0 has VCPU ID 4294967295
> bios32: Found BIOS32 Service Directory header at 0xc00f7030
> bios32: Entry = 0xfd7e0 (c00fd7e0)  Rev = 0  Len = 1
> pcibios: PCI BIOS entry at 0xfd770+0x18e
> pnpbios: Found PnP BIOS data at 0xc00f7090
> pnpbios: Entry = f0000:9d76  Rev = 1.0
> pnpbios: Event flag at 4b4
> Other BIOS signatures found:
> ULE: setup cpu 0
> wlan: <802.11 Link Layer>
> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32]
> c=0x000003ff [1024]
> feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5
> feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
> Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
> Hardware, Intel IvyBridge+ RNG: RDRAND is not present
> kbd: new array size 4
> kbd1 at kbdmux0
> mem: <memory>
> Pentium Pro MTRR support enabled
> nfslock: pseudo-device
> null: <null device, zero device>
> Falling back to <Software, Yarrow> random adaptor
> random: <Software, Yarrow> initialized
> VESA: INT 0x10 vector 0xc000:0x206c
> VESA: information block
> 0000   56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00
> 0010   00 01 ff 03 00 01 19 01 00 01 2f 01 00 01 34 01
> 0020   00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01
> 0030   94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01
> 0040   b2 01 b3 01 b4 01 b5 01 b6 01 c2 01 c3 01 c4 01
> 0050   c5 01 c6 01 00 01 83 01 84 01 85 01 86 01 01 01
> 0060   10 01 11 01 12 01 21 01 03 01 13 01 14 01 15 01
> 0070   22 01 05 01 16 01 17 01 18 01 23 01 07 01 19 01
> 0080   1a 01 1b 01 24 01 40 01 41 01 42 01 43 01 44 01
> 0090   72 01 73 01 74 01 75 01 76 01 ff ff 00 00 00 00
> 00a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0100   41 54 49 20 4d 4f 42 49 4c 49 54 59 20 52 41 44
> 0110   45 4f 4e 20 37 35 30 30 00 41 54 49 20 54 65 63
> 0120   68 6e 6f 6c 6f 67 69 65 73 20 49 6e 63 2e 00 50
> 0130   37 20 20 00 30 31 2e 30 30 00 00 00 00 00 00 00
> 0140   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0150   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0160   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0170   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0180   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0190   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 01a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 01b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 01c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 01d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 01e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 01f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> VESA: 60 mode(s) found
> VESA: v2.0, 65472k memory, flags:0x1, mode table:0xe3ee6022 (1000022)
> VESA: ATI MOBILITY RADEON 7500
> VESA: ATI Technologies Inc. P7   01.00
> io: <I/O>
> hpt27xx: RocketRAID 27xx controller driver v1.1
> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
> hptnr: R750/DC7280 controller driver v1.0
> ACPI: RSDP 0xf7060 00024 (v02 IBM   )
> ACPI: XSDT 0x3ff72c6d 00044 (v01 IBM    TP-1G    00001120  LTP
> 00000000)
> ACPI: FACP 0x3ff72d00 00081 (v01 IBM    TP-1G    00001120 IBM
> 00000001)
> ACPI: DSDT 0x3ff72de7 0B06F (v01 IBM    TP-1G    00001120 MSFT
> 0100000D)
> ACPI: FACS 0x3ff7f000 00040
> ACPI: SSDT 0x3ff72db4 00033 (v01 IBM    TP-1G    00001120 MSFT
> 0100000D)
> ACPI: ECDT 0x3ff7de56 00052 (v01 IBM    TP-1G    00001120 IBM
> 00000001)
> ACPI: BOOT 0x3ff7dfd8 00028 (v01 IBM    TP-1G    00001120  LTP
> 00000001)
> acpi0: <IBM TP-1G> on motherboard
> ACPI: All ACPI Tables successfully acquired
> acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on
> acpi0
> pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=060000] [hdr=00] is there
> (id=1a308086)
> pcibios: BIOS version 2.10
> acpi0: Power Button (fixed)
> acpi0: wakeup code va 0xe3f17000 pa 0x1000
> atpic: Programming IRQ9 as level/low
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 3ff00000 (3) failed
> cpu0: <ACPI CPU> on acpi0
> cpu0: switching to generic Cx mode
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> atrtc0: registered as a time-of-day clock (resolution 1000000us,
> adjustment 0.500000000s)
> Event timer "RTC" frequency 32768 Hz quality 0
> ACPI timer: 0/15 0/15 0/15 0/15 0/15 0/15 0/15 0/15 0/15 0/15 -> 0
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on
> acpi0
> pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
>   Validation          0   11   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
>   Validation          0   11   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
>   Validation          0   11   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
>   Validation          0   11   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
>   Validation          0   11   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0  255   N     0  3 4 5 6 7 9 10 11
>   Validation          0  255   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0  255   N     0  3 4 5 6 7 9 10 11
>   Validation          0  255   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>   Initial Probe       0  255   N     0  3 4 5 6 7 9 10 11
>   Validation          0  255   N     0  3 4 5 6 7 9 10 11
>   After Disable       0  255   N     0  3 4 5 6 7 9 10 11
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Sleep Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pcib0: decoding 4 range 0-0xcf7
> pcib0: decoding 4 range 0xd00-0xffff
> pcib0: decoding 3 range 0xa0000-0xbffff
> pcib0: decoding 3 range 0xd4000-0xd7fff
> pcib0: decoding 3 range 0xd8000-0xdbfff
> pcib0: decoding 3 range 0x40000000-0xfebfffff
> ACPI: Found matching pin for 0.29.INTA at func 0: 11
> ACPI: Found matching pin for 0.29.INTB at func 1: 11
> ACPI: Found matching pin for 0.29.INTC at func 2: 11
> ACPI: Found matching pin for 0.31.INTA at func 1: 255
> ACPI: Found matching pin for 0.31.INTB at func 3: 11
> pci0: <ACPI PCI bus> on pcib0
> pci0: domain=0, physical bus=0
> found-> vendor=0x8086, dev=0x1a30, revid=0x04
> domain=0, bus=0, slot=0, func=0
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size
> 26, enabled
> pcib0: allocated type 3 (0xe0000000-0xe3ffffff) for rid 10 of
> pci0:0:0:0
> found-> vendor=0x8086, dev=0x1a31, revid=0x04
> domain=0, bus=0, slot=1, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
> lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0
> ns)
> found-> vendor=0x8086, dev=0x2482, revid=0x02
> domain=0, bus=0, slot=29, func=0
> class=0c-03-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> map[20]: type I/O Port, range 32, base 0x1800, size  5, enabled
> pcib0: allocated type 4 (0x1800-0x181f) for rid 20 of pci0:0:29:0
> pcib0: matched entry for 0.29.INTA (src \134_SB_.LNKA:0)
> pcib0: slot 29 INTA routed to irq 11 via \134_SB_.LNKA
> found-> vendor=0x8086, dev=0x2484, revid=0x02
> domain=0, bus=0, slot=29, func=1
> class=0c-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=11
> map[20]: type I/O Port, range 32, base 0x1820, size  5, enabled
> pcib0: allocated type 4 (0x1820-0x183f) for rid 20 of pci0:0:29:1
> pcib0: matched entry for 0.29.INTB (src \134_SB_.LNKD:0)
> pcib0: slot 29 INTB routed to irq 11 via \134_SB_.LNKD
> found-> vendor=0x8086, dev=0x2487, revid=0x02
> domain=0, bus=0, slot=29, func=2
> class=0c-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=c, irq=11
> map[20]: type I/O Port, range 32, base 0x1840, size  5, enabled
> pcib0: allocated type 4 (0x1840-0x185f) for rid 20 of pci0:0:29:2
> pcib0: matched entry for 0.29.INTC (src \134_SB_.LNKC:0)
> pcib0: slot 29 INTC routed to irq 11 via \134_SB_.LNKC
> found-> vendor=0x8086, dev=0x2448, revid=0x42
> domain=0, bus=0, slot=30, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0
> ns)
> found-> vendor=0x8086, dev=0x248c, revid=0x02
> domain=0, bus=0, slot=31, func=0
> class=06-01-00, hdrtype=0x00, mfdev=1
> cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x248a, revid=0x02
> domain=0, bus=0, slot=31, func=1
> class=01-01-8a, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=255
> pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1
> pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1
> pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1
> pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1
> map[20]: type I/O Port, range 32, base 0x1860, size  4, enabled
> pcib0: allocated type 4 (0x1860-0x186f) for rid 20 of pci0:0:31:1
> map[24]: type Memory, range 32, base 0, size 10, memory disabled
> found-> vendor=0x8086, dev=0x2483, revid=0x02
> domain=0, bus=0, slot=31, func=3
> class=0c-05-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=11
> map[20]: type I/O Port, range 32, base 0x1880, size  5, enabled
> pcib0: allocated type 4 (0x1880-0x189f) for rid 20 of pci0:0:31:3
> pcib0: matched entry for 0.31.INTB (src \134_SB_.LNKB:0)
> pcib0: slot 31 INTB routed to irq 11 via \134_SB_.LNKB
> found-> vendor=0x8086, dev=0x2485, revid=0x02
> domain=0, bus=0, slot=31, func=5
> class=04-01-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=11
> map[10]: type I/O Port, range 32, base 0x1c00, size  8, enabled
> pcib0: allocated type 4 (0x1c00-0x1cff) for rid 10 of pci0:0:31:5
> map[14]: type I/O Port, range 32, base 0x18c0, size  6, enabled
> pcib0: allocated type 4 (0x18c0-0x18ff) for rid 14 of pci0:0:31:5
> pcib0: matched entry for 0.31.INTB (src \134_SB_.LNKB:0)
> pcib0: slot 31 INTB routed to irq 11 via \134_SB_.LNKB
> found-> vendor=0x8086, dev=0x2486, revid=0x02
> domain=0, bus=0, slot=31, func=6
> class=07-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=11
> map[10]: type I/O Port, range 32, base 0x2400, size  8, enabled
> pcib0: allocated type 4 (0x2400-0x24ff) for rid 10 of pci0:0:31:6
> map[14]: type I/O Port, range 32, base 0x2000, size  7, enabled
> pcib0: allocated type 4 (0x2000-0x207f) for rid 14 of pci0:0:31:6
> pcib0: matched entry for 0.31.INTB (src \134_SB_.LNKB:0)
> pcib0: slot 31 INTB routed to irq 11 via \134_SB_.LNKB
> agp0: <Intel 82845 host to AGP bridge> on hostb0
> agp0: allocating GATT for aperture of size 64M
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pcib1: allocating non-ISA range 0x3000-0x30ff
> pcib0: allocated type 4 (0x3000-0x30ff) for rid 1c of pcib1
> pcib1: allocating non-ISA range 0x3400-0x34ff
> pcib0: allocated type 4 (0x3400-0x34ff) for rid 1c of pcib1
> pcib1: allocating non-ISA range 0x3800-0x38ff
> pcib0: allocated type 4 (0x3800-0x38ff) for rid 1c of pcib1
> pcib1: allocating non-ISA range 0x3c00-0x3cff
> pcib0: allocated type 4 (0x3c00-0x3cff) for rid 1c of pcib1
> pcib0: allocated type 3 (0xd0100000-0xd01fffff) for rid 20 of pcib1
> pcib0: allocated type 3 (0xe8000000-0xefffffff) for rid 24 of pcib1
> pcib1:   domain            0
> pcib1:   secondary bus     1
> pcib1:   subordinate bus   1
> pcib1:   I/O decode        0x3000-0x3fff
> pcib1:   memory decode     0xd0100000-0xd01fffff
> pcib1:   prefetched decode 0xe8000000-0xefffffff
> pcib1:   special decode    ISA, VGA
> ACPI: Found matching pin for 1.0.INTA at func 0: 11
> pci1: <ACPI PCI bus> on pcib1
> pci1: domain=0, physical bus=1
> found-> vendor=0x1002, dev=0x4c58, revid=0x00
> domain=0, bus=1, slot=0, func=0
> class=03-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0387, statreg=0x02b0, cachelnsz=8 (dwords)
> lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=11
> powerspec 2  supports D0 D1 D2 D3  current D0
> map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size
> 27, enabled
> pcib1: allocated prefetch range (0xe8000000-0xefffffff) for rid 10 of
> pci0:1:0:0
> map[14]: type I/O Port, range 32, base 0x3000, size  8, enabled
> pcib1: allocated I/O port range (0x3000-0x30ff) for rid 14 of
> pci0:1:0:0
> map[18]: type Memory, range 32, base 0xd0100000, size 16, enabled
> pcib1: allocated memory range (0xd0100000-0xd010ffff) for rid 18 of
> pci0:1:0:0
> pcib1: matched entry for 1.0.INTA (src \134_SB_.LNKA:0)
> pcib1: slot 0 INTA routed to irq 11 via \134_SB_.LNKA
> vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem
> 0xe8000000-0xefffffff,0xd0100000-0xd010ffff irq 11 at device 0.0 on
> pci1
> vgapci0: Boot video device
> uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port
> 0x1800-0x181f irq 11 at device 29.0 on pci0
> usbus0 on uhci0
> uhci0: usbpf: Attached
> uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port
> 0x1820-0x183f irq 11 at device 29.1 on pci0
> usbus1 on uhci1
> uhci1: usbpf: Attached
> uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port
> 0x1840-0x185f irq 11 at device 29.2 on pci0
> usbus2 on uhci2
> uhci2: usbpf: Attached
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pcib2: allocating non-ISA range 0x4000-0x40ff
> pcib0: allocated type 4 (0x4000-0x40ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x4400-0x44ff
> pcib0: allocated type 4 (0x4400-0x44ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x4800-0x48ff
> pcib0: allocated type 4 (0x4800-0x48ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x4c00-0x4cff
> pcib0: allocated type 4 (0x4c00-0x4cff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x5000-0x50ff
> pcib0: allocated type 4 (0x5000-0x50ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x5400-0x54ff
> pcib0: allocated type 4 (0x5400-0x54ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x5800-0x58ff
> pcib0: allocated type 4 (0x5800-0x58ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x5c00-0x5cff
> pcib0: allocated type 4 (0x5c00-0x5cff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x6000-0x60ff
> pcib0: allocated type 4 (0x6000-0x60ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x6400-0x64ff
> pcib0: allocated type 4 (0x6400-0x64ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x6800-0x68ff
> pcib0: allocated type 4 (0x6800-0x68ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x6c00-0x6cff
> pcib0: allocated type 4 (0x6c00-0x6cff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x7000-0x70ff
> pcib0: allocated type 4 (0x7000-0x70ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x7400-0x74ff
> pcib0: allocated type 4 (0x7400-0x74ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x7800-0x78ff
> pcib0: allocated type 4 (0x7800-0x78ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x7c00-0x7cff
> pcib0: allocated type 4 (0x7c00-0x7cff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x8000-0x80ff
> pcib0: allocated type 4 (0x8000-0x80ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x8400-0x84ff
> pcib0: allocated type 4 (0x8400-0x84ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x8800-0x88ff
> pcib0: allocated type 4 (0x8800-0x88ff) for rid 1c of pcib2
> pcib2: allocating non-ISA range 0x8c00-0x8cff
> pcib0: allocated type 4 (0x8c00-0x8cff) for rid 1c of pcib2
> pcib0: allocated type 3 (0xd0200000-0xdfffffff) for rid 20 of pcib2
> pcib0: allocated type 3 (0xf0000000-0xf7ffffff) for rid 24 of pcib2
> pcib2:   domain            0
> pcib2:   secondary bus     2
> pcib2:   subordinate bus   8
> pcib2:   I/O decode        0x4000-0x8fff
> pcib2:   memory decode     0xd0200000-0xdfffffff
> pcib2:   prefetched decode 0xf0000000-0xf7ffffff
> pcib2:   special decode    ISA, subtractive
> ACPI: Found matching pin for 2.0.INTA at func 0: 11
> ACPI: Found matching pin for 2.0.INTB at func 1: 11
> ACPI: Found matching pin for 2.0.INTC at func 2: 11
> ACPI: Found matching pin for 2.8.INTA at func 0: 11
> pci2: <ACPI PCI bus> on pcib2
> pci2: domain=0, physical bus=2
> found-> vendor=0x1180, dev=0x0476, revid=0xa8
> domain=0, bus=2, slot=0, func=0
> class=06-07-00, hdrtype=0x02, mfdev=1
> cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07
> (1750 ns)
> intpin=a, irq=11
> powerspec 2  supports D0 D1 D2 D3  current D0
> map[10]: type Memory, range 32, base 0x50000000, size 12, enabled
> pcib0: allocated type 3 (0x50000000-0x50000fff) for rid 10 of
> pci0:2:0:0
> pcib2: matched entry for 2.0.INTA (src \134_SB_.LNKA:0)
> pcib2: slot 0 INTA routed to irq 11 via \134_SB_.LNKA
> found-> vendor=0x1180, dev=0x0476, revid=0xa8
> domain=0, bus=2, slot=0, func=1
> class=06-07-00, hdrtype=0x02, mfdev=1
> cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07
> (1750 ns)
> intpin=b, irq=11
> powerspec 2  supports D0 D1 D2 D3  current D0
> map[10]: type Memory, range 32, base 0x50100000, size 12, enabled
> pcib0: allocated type 3 (0x50100000-0x50100fff) for rid 10 of
> pci0:2:0:1
> pcib2: matched entry for 2.0.INTB (src \134_SB_.LNKB:0)
> pcib2: slot 0 INTB routed to irq 11 via \134_SB_.LNKB
> found-> vendor=0x1180, dev=0x0552, revid=0x00
> domain=0, bus=2, slot=0, func=2
> class=0c-00-10, hdrtype=0x00, mfdev=1
> cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04
> (1000 ns)
> intpin=c, irq=11
> powerspec 2  supports D0 D3  current D0
> map[10]: type Memory, range 32, base 0xd0201000, size 11, enabled
> pcib2: allocated memory range (0xd0201000-0xd02017ff) for rid 10 of
> pci0:2:0:2
> pcib2: matched entry for 2.0.INTC (src \134_SB_.LNKC:0)
> pcib2: slot 0 INTC routed to irq 11 via \134_SB_.LNKC
> found-> vendor=0x8086, dev=0x1031, revid=0x42
> domain=0, bus=2, slot=8, func=0
> class=02-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
> lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38
> (14000 ns)
> intpin=a, irq=11
> powerspec 2  supports D0 D1 D2 D3  current D0
> map[10]: type Memory, range 32, base 0xd0200000, size 12, enabled
> pcib2: allocated memory range (0xd0200000-0xd0200fff) for rid 10 of
> pci0:2:8:0
> map[14]: type I/O Port, range 32, base 0x8000, size  6, enabled
> pcib2: allocated I/O port range (0x8000-0x803f) for rid 14 of
> pci0:2:8:0
> pcib2: matched entry for 2.8.INTA (src \134_SB_.LNKE:0)
> pcib2: slot 8 INTA routed to irq 11 via \134_SB_.LNKE
> cbb0: <RF5C476 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11
> at device 0.0 on pci2
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> cbb0: PCI Configuration space:
>   0x00: 0x04761180 0x02100107 0x060700a8 0x00824000
>   0x10: 0x50000000 0x020000dc 0xb0050302 0xfffff000
>   0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
>   0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010b
>   0x40: 0x01851014 0x00000001 0x00000000 0x00000000
>   0x50: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x60: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x70: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x80: 0x04800001 0x00000000 0x04630464 0x00000000
>   0x90: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xa0: 0x008a0000 0x00000000 0x00f00000 0x00000000
>   0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xc0: 0x01851014 0x00000000 0x00000000 0x00000000
>   0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
>   0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
>   0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
> cbb1: <RF5C476 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11
> at device 0.1 on pci2
> cardbus1: <CardBus bus> on cbb1
> pccard1: <16-bit PCCard bus> on cbb1
> cbb1: PCI Configuration space:
>   0x00: 0x04761180 0x02100107 0x060700a8 0x00824000
>   0x10: 0x50100000 0x020000dc 0xb0080602 0xfffff000
>   0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
>   0x30: 0x00000000 0xfffffffc 0x00000000 0x0700020b
>   0x40: 0x01851014 0x00000001 0x00000000 0x00000000
>   0x50: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x60: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x70: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x80: 0x04800001 0x00000000 0x04630464 0x00000000
>   0x90: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xa0: 0x008a0000 0x00000000 0x00f00000 0x00000000
>   0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xc0: 0x01851014 0x00000000 0x00000000 0x00000000
>   0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
>   0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
>   0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
> pci2: <serial bus, FireWire> at device 0.2 (no driver attached)
> fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f
> mem 0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2
> fxp0: using memory space register mapping
> fxp0: PCI IDs: 8086 1031 1014 0209 0042
> fxp0: Dynamic Standby mode is disabled
> miibus0: <MII bus> on fxp0
> inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
> inphy0: OUI 0x005500, model 0x0033, rev. 0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto,
> auto-flow
> fxp0: bpf attached
> fxp0: Ethernet address: 00:0e:9b:2c:c7:f6
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH3 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on
> pci0
> ata0: <ATA channel> at channel 0 on atapci0
> ata1: <ATA channel> at channel 1 on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pcm0: <Intel ICH3 (82801CA)> port 0x1c00-0x1cff,0x18c0-0x18ff irq 11
> at device 31.5 on pci0
> pcm0: <Analog Devices AD1881A AC97 Codec (id = 0x41445348)>
> pcm0: Codec features headphone, 6 bit master volume, Analog Devices
> Phat Stereo
> pcm0: Primary codec extended features variable rate PCM
> pcm0: ac97 codec dac ready count: 0
> pcm0: Mixer "vol":
> pcm0: Mixer "pcm":
> pcm0: Mixer "speaker":
> pcm0: Mixer "line":
> pcm0: Mixer "mic":
> pcm0: Mixer "cd":
> pcm0: Mixer "rec":
> pcm0: Mixer "igain":
> pcm0: Mixer "line1":
> pcm0: Mixer "phin":
> pcm0: Mixer "phout":
> pcm0: Mixer "video":
> pci0: <simple comms, generic modem> at device 31.6 (no driver
> attached)
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x54ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> atkbd0: [GIANT-LOCKED]
> psm0: unable to allocate IRQ
> psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
> psm0: current command byte:0047
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
> psm0: config:00004000, flags:00000008, packet size:3
> psm0: syncmask:c0, syncbits:00
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
> uart0: fast interrupt
> ppc0: using extended I/O port range
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> ex_isa_identify()
> ahc_isa_identify 0: ioport 0xc00 alloc failed
> ahc_isa_identify 1: ioport 0x1c00 alloc failed
> ahc_isa_identify 2: ioport 0x2c00 alloc failed
> ahc_isa_identify 3: ioport 0x3c00 alloc failed
> ahc_isa_identify 4: ioport 0x4c00 alloc failed
> ahc_isa_identify 5: ioport 0x5c00 alloc failed
> ahc_isa_identify 6: ioport 0x6c00 alloc failed
> ahc_isa_identify 7: ioport 0x7c00 alloc failed
> ahc_isa_identify 8: ioport 0x8c00 alloc failed
> ahc_isa_identify 9: ioport 0x9c00 alloc failed
> ahc_isa_identify 10: ioport 0xac00 alloc failed
> ahc_isa_identify 11: ioport 0xbc00 alloc failed
> ahc_isa_identify 12: ioport 0xcc00 alloc failed
> ahc_isa_identify 13: ioport 0xdc00 alloc failed
> ahc_isa_identify 14: ioport 0xec00 alloc failed
> pnp_identify: Trying Read_Port at 203
> pnp_identify: Trying Read_Port at 243
> pnp_identify: Trying Read_Port at 283
> pnp_identify: Trying Read_Port at 2c3
> pnp_identify: Trying Read_Port at 303
> pnp_identify: Trying Read_Port at 343
> pnp_identify: Trying Read_Port at 383
> pnp_identify: Trying Read_Port at 3c3
> PNP Identify complete
> pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
> pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
> pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
> pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
> pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
> pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
> pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
> pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
> pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 3 of orm0
> pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 3 of orm0
> pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 3 of orm0
> pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 3 of orm0
> pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 3 of orm0
> pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 3 of orm0
> pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 3 of orm0
> pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 3 of orm0
> pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 3 of orm0
> pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 3 of orm0
> pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 3 of orm0
> pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 3 of orm0
> pcib0: allocated type 3 (0xda000-0xda7ff) for rid 3 of orm0
> pcib0: allocated type 3 (0xda800-0xdafff) for rid 3 of orm0
> pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 3 of orm0
> pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 3 of orm0
> isa_probe_children: disabling PnP devices
> pmtimer0 on isa0
> ata: ata0 already exists; skipping it
> ata: ata1 already exists; skipping it
> atkbdc: atkbdc0 already exists; skipping it
> atrtc: atrtc0 already exists; skipping it
> attimer: attimer0 already exists; skipping it
> sc: sc0 already exists; skipping it
> uart: uart0 already exists; skipping it
> isa_probe_children: probing non-PnP devices
> orm0: <ISA Option ROMs> at iomem
> 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe000
> 0-0xeffff pnpid ORM0000 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
> pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
> pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
> pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
> fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> ppc0: parallel port not found.
> ppc0 failed to probe at irq 7 on isa0
> uart1 failed to probe at port 0x2f8 irq 3 on isa0
> wbwd0 failed to probe on isa0
> isa_probe_children: probing PnP devices
> acpi_perf0: <ACPI CPU Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> Device configuration finished.
> procfs registered
> Timecounters tick every 1.000 msec
> vlan: initialized, using hash tables with chaining
> tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192
> lo0: bpf attached
> hpt27xx: no controller detected.
> hptrr: no controller detected.
> hptnr: no controller detected.
> pcm0: measured ac97 link rate at 48003 Hz, will use 48000 Hz
> random: unblocking device.
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> ata0: reset tp1 mask=03 ostat0=50 ostat1=00
> ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
> ata0: reset tp2 stat0=50 stat1=00 devices=0x1
> ugen2.1: <Intel> at usbus2
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
> usbus2
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
> usbus1
> ugen0.1: <Intel> at usbus0
> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
> usbus0
> ata1: reset tp1 mask=03 ostat0=50 ostat1=00
> ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata1: reset tp2 stat0=00 stat1=00 devices=0x30000
> battery0: battery initialization start
> acpi_acad0: acline initialization start
> battery0: battery initialization done, tried 1 times
> acpi_acad0: On Line
> acpi_acad0: acline initialization done, tried 1 times
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> ata1: reset tp1 mask=03 ostat0=50 ostat1=00
> ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata1: reset tp2 stat0=00 stat1=00 devices=0x30000
> (aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00
> 00 00 00
> (aprobe0:ata1:0:1:0): CAM status: Command timeout
> (aprobe0:ata1:0:1:0): Error 5, Retry was blocked
> run_interrupt_driven_hooks: still waiting after 60 seconds for
> xpt_config
> ata1: reset tp1 mask=03 ostat0=50 ostat1=00
> ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata1: reset tp2 stat0=00 stat1=00 devices=0x30000
> (aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00
> 00 00 00
> (aprobe0:ata1:0:1:0): CAM status: Command timeout
> (aprobe0:ata1:0:1:0): Error 5, Retry was blocked
> ada0 at ata0 bus 0 scbus0 target 0 lun 0
> ada0: <HTS721080G9AT00 MC4OA51A> ATA-6 device
> ada0: Serial Number MPC412Y4G6J1AE
> ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
> GEOM: new disk ada0
> ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad0
> pass0 at ata0 bus 0 scbus0 target 0 lun 0
> pass0: <HTS721080G9AT00 MC4OA51A> ATA-6 device
> pass0: Serial Number MPC412Y4G6J1AE
> pass0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
> pass1 at ata1 bus 0 scbus1 target 0 lun 0
> pass1: <MATSHITA UJDA720 DVD/CDRW 1.03> Removable CD-ROM SCSI-0
> device
> pass1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
> cd0 at ata1 bus 0 scbus1 target 0 lun 0
> cd0: <MATSHITA UJDA720 DVD/CDRW 1.03> Removable CD-ROM SCSI-0 device
> cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
> cd0: cd present [288727 x 2048 byte records]
> TSC timecounter disabled: C3 enabled.
> Timecounter "TSC" frequency 1698592154 Hz quality -1000
> GEOM: new disk cd0
> Trying to mount root from ufs:/dev/ada0p2 [rw]...
> start_init: trying /sbin/init
>
>
>  - fini -
>
>
>
>
>
> _______________________________________________
> [hidden email] mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "[hidden email]"
>

_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[hidden email]"
Reply | Threaded
Open this post in threaded view
|

Re: Looping during boot-up process in FreeBSD-11 current

José Pérez Arauzo
Hi Alexander,

On Sun, 05 Oct 2014 01:57:13 +0400, Alexander V. Chernikov wrote

> On 01.10.2014 02:02, Mike. wrote:
> > On 9/30/2014 at 7:25 PM José Pérez Arauzo wrote:
> >
> >
> > |[snip]
> > |Try the 271146,
> > |[snip]
> >  =============
>
> This might be related with r271207.
> Can you try r271206 (or any recent HEAD with reverted r271207) ?

Yes, it actually boots with head and ahci.[c|h] from r271206, so we
can safely assume r271207 (the dev<->ch change) is not working on
some hardware.

Mike, can you please confirm, just to be sure?

Now, in case Mike (or anyone with the same problem) confirms, what
can we do to have it fixed? Thank you.

BR,

--
José Pérez Arauzo
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[hidden email]"
Reply | Threaded
Open this post in threaded view
|

Re: Looping during boot-up process in FreeBSD-11 current

Mike.
In reply to this post by Alexander V. Chernikov-4
On 10/5/2014 at 1:57 AM Alexander V. Chernikov wrote:

|On 01.10.2014 02:02, Mike. wrote:
|> On 9/30/2014 at 7:25 PM José Pérez Arauzo wrote:
|>
|>
|> |[snip]
|> |Try the 271146,
|> |[snip]
|>  =============
|
|This might be related with r271207.
|Can you try r271206 (or any recent HEAD with reverted r271207) ?
|
 =============

Thanks for the reply.

Apologies for the delay in responding, I've been off the grid since
last Thursday.


I tried r271206 and r271207.  They both worked.   The boot sequence
progressed up to and including the login prompt.


If there's anything else you'd like me to try, let me know.


Thanks,
Mike


_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[hidden email]"
Reply | Threaded
Open this post in threaded view
|

Re: Looping during boot-up process in FreeBSD-11 current

Axel Wintermann
I have the same problem as upgrading FreeBSD 10.0=>Freebsd 10.1. I'd rolled back Freebsd 10.0
12